Nuclear and energy components are built from alloys whose value lies in a carefully engineered microstructure — and fusion welding, by melting and re-solidifying the joint, locally destroys exactly that. FSW’s solid-state character is why this sector keeps returning to it for its highest-integrity joints. Thick-section copper waste canisters, leak-tight thermal hardware and aluminium-to-copper transitions are the production uses.
Where FSW is used today
Copper canisters for spent nuclear fuel
The canonical application: Sweden’s SKB selected FSW over electron beam welding to seal 50 mm-thick copper canisters for geological disposal, after years of side-by-side qualification — a weld that must remain corrosion-tight for tens of thousands of years, made in production by a solid-state process. Thick-section copper welding, including bobbin-tool approaches and the specialised tool materials it demands, has been an FSW specialism ever since.
Heat exchangers and power electronics cooling
Leak-tight closure welds on copper and aluminium thermal hardware for power conversion, grid electronics and instrumentation (see thermal management).
Dissimilar metal transitions
Aluminium-to-copper joints for electrical and thermal hardware — a combination fusion processes handle badly because of brittle intermetallics, and a routine solid-state application.
Where the research is heading
- Fusion-reactor steels. Reduced-activation ferritic-martensitic steels (and the related 9Cr creep-resistant grades) are optimised for high-temperature strength and toughness that fusion welding degrades. FSW parameter studies are building the case for solid-state fabrication of in-vessel and breeder components.
- Tungsten and refractory metals. Friction stir deposition as a crack-repair and surface-rebuild route for tungsten plasma-facing components, where every fusion-welding route fails on brittleness.
- Thick sections and process monitoring. Extending single-pass capability in copper and steel, and force/torque/temperature monitoring as the digital quality record nuclear qualification frameworks increasingly ask for.
- HV transmission. Solid-state joining of aluminium conductors and busbars — low-resistance, fatigue-tolerant joints for cable systems and offshore transmission, where every micro-ohm is a lifetime efficiency loss.
Next step A structured feasibility trial answers the question on your geometry, with measurements rather than argument.